Blog

Lithium Battery for a Telecom Tower in Bangladesh | SARBS

November 3, 2026 ยท 1 min read

SARBS sizes a lithium battery for a telecom tower in Bangladesh around the 48V bus, the night load and the road back to the site.

SARBS lithium battery equipment for a telecom tower in Bangladesh

A lithium battery for a telecom tower in Bangladesh has one job: keep the radio on when the feeder fails, then accept a messy recharge when the feeder returns. SARBS Communications Ltd. supplies the 48V 100Ah LiFePO4 battery for that cycle, and the rectifier that feeds the same DC bus.

Size it from the site, not from a slogan

Hours of backup depend on the radio load, the tenants and the worst evening, not on the ampere-hour number alone. SARBS publishes tenant current, watts and battery status through a rectifier with built-in RMS, which is the data a planner should already have before adding a string. The LiFePO4 note on partial state of charge matters because many towers never complete a textbook full charge. Weight matters because the string has to be carried in. About forty percent of the lead-acid weight is the published comparison.

Two thousand completed telecom sites is the SARBS record for this kind of work. Anti-theft racks, outdoor cabinets and maintenance are listed because a tower battery that cannot be locked or serviced does not stay a battery for long.

A short site brief

  • Load in watts, and the hours you must cover.
  • Grid hours, generator hours, or solar.
  • Existing 48V plant, cabinet space and security.

Start from the power checklist and send it to SARBS.

Figures and product notes on this page are taken from the public SARBS website, the SARBS LinkedIn page and the SARBS YouTube channel.

Categories: SARBS Telecom Lithium, Towers & Sites, SARBS Lithium Batteries

Tags: LiFePO4, SARBS, Telecom, Tower