Blog

Drop-in LiFePO4 Replacement in Bangladesh | SARBS

October 26, 2026 · 1 min read

SARBS calls the 48V 100Ah LiFePO4 battery a drop-in replacement in Bangladesh. The cabinet, the cables and the charge settings still have to be checked.

SARBS drop-in LiFePO4 replacement battery in Bangladesh

SARBS Communications Ltd. describes its 48V 100Ah LiFePO4 battery as a drop-in replacement for lead-acid on a telecom site in Bangladesh. Drop-in means the string is meant to sit on the same 48V plant. It does not mean every bolt, charge voltage and alarm limit can be ignored.

What you can keep, and what you must check

Keep the nominal 48V bus and plan the mechanical fit in the cabinet or the anti-theft rack. The lithium battery weighs about forty percent of a comparable lead-acid battery, so the shelf is usually easier, not harder. Check the rectifier. A SARBS rectifier delivers 54V DC from 85–300V AC, and a lead-acid charge preset is not automatically a LiFePO4 preset. Ask for the lithium settings before the swap, including what the controller will do on a partial charge, because hybrid sites live there.

The gain SARBS prints is up to ten times the cycle life and five times the float calendar life, plus about twice the power at high discharge. Those gains show up after the charge profile is right. If the old jars are still healthy, regeneration remains a SARBS option, with ten thousand lead-acid batteries already regenerated. Replacement is for the string that will not finish the next season.

Swap checklist

  • 48V confirmed, capacity chosen, LiFePO4 named.
  • Charge settings confirmed with the rectifier.
  • Cables, lugs, rack and alarm limits planned.

Read the 48V product note and book the survey via contact.

Figures and product notes on this page are taken from the public SARBS website, the SARBS LinkedIn page and the SARBS YouTube channel.

Categories: LiFePO4 Batteries, SARBS LiFePO4, SARBS Lithium Batteries

Tags: Lead-Acid, LiFePO4, SARBS, SARBS LiFePO4